Audi A4 / A6 2.0TFSI Oil Pump Balance Shaft Delete kit inc fitting instructions

Audi A4 / A6 2.0TFSI Oil Pump Balance Shaft Delete kit inc fitting instructions

€524.95

Audi / VW / Skoda /Seat / Dodge / Jeep 2.0 TFSI Balance shaft delete kit

When ordering this kit please send a contact phone number for the courier service inc any area or international codes as this will delay our dispatch time.
Also the vehicle details it is required for.

Suitable for 2004-2012 FSI / TFSI longitudinal engines
The oil pump conversion for the 2.0 TFSI / FSI allows you to abolish the failure prone balance shafts while at the same time adding a larger higher flowing oil pump.  As an added beneifit, the OEM oil sump capacity is increased by almost 2.27 litres. The conversion is a complex installation and should only be performed by experienced mechanics / technicians. 
The oil pump has been modified to accept an oil pressure relief valve to protect the engine from over pressurising and damaging oil seals, oil coolers, gaskets, turbos, external oil pipes, etc.
 
The oil filter housing has a bypass valve which comes into use when the weather is cold and the oil is too thick to go through the oil filter. Having the relief valve protects the engine from over pressurising and causing any internal or external damage.
Also when the engine is worked hard and delivering high oil pressure the Oil Pressure Relief Valve allows excess oil pressure to be released through the Oil Pressure Relief Valve to protect the engine and its components.

Tools Required
Basic hand tools are needed to complete the installation. Including but not limited to -  metric allan key sockets, metric sockets, ratchets, torx sockets and a torx wrench.  A three jaw puller may also be needed.
 
Our delete kit includes -
  1. Fitting Instructions 
  2. Modified Oil pump
  3. Oil pump chain
  4. Oil pan baffle
  5. Oil pump pickup pipe
  6. Oil pickup tube `O` ring
  7. Oil pickup tube bolts [x2 short]
  8. Oil pump mounting bolts [x2 long]
  9. Oil Pressure Relief Valve
  10. Drill & 10mm tap
  11. Crankshaft sprocket
  12. 6mm drill & 7.1 tap
  13. Oil Pickup Pipe 
  14. Alignment Plate for drilling tensioner hole
  15. Genuine Oil Filter. [ Please send vin to confirm filter type ] 
 
 
Suitable for Audi / VW / Skoda / Seat 2.0 TFSI Petrol Engines.

Parts supplied are as pictured. All Parts are new.

Suitable engine codes - 2004 - 2012

AXW AXX BGB BHZ BLR BLX BLY BMB BPG BPJ BPY BUL BVY BVZ BWA BWE BWT BYK BZC S3 Quattro

Please note: Dates and Engine codes are to be used as a guide only as some engine codes and manufactured years overlap. If you are unsure which system your car uses please visit our contact us page to let us know what your Engine Code or your Chassis / VIN number is and we should be able to help identify the system your car uses.

International customers are welcome, the delivery time will vary but normally 5 - 10 working days.