Hantek Oscilloscope Digital Osciloscopio 1008C
Cost effective 8 channel oscilloscope for vehicle testing; 2.4 MSa/s, 12 bit; DAQ card function; 8 channel programmable generator capable of analog signals such as crankshaft, camshaft, etc.
Vehicle test:
- First diagnosis: intake manifold vacuum and ignition, gasoline fuel control valve vacuum and ignition, idle exhaust ignition, exhaust ignition start.
- Ignition: primary and secondary.
- Sensors: air flow meter, camshaft, crankshaft, distributor, lambda sensor, throttle position.
- Bus diagnostics: bus data, can bus signal integrity, can check LH extended acquisition, can bus LIN bus.
- Cast: Gasoline/Diesel.
- Starter and charging circuit.
oscilloscope:
- 8 channel oscilloscope, 2.4MSa/s real time sampling rate.
2.12 bit vertical resolution, spectrum analysis function.
Programmable generator:
1.8 channel programmable generator.
2.Analog signals such as crankshaft and camshaft can be used.
Etc:
1.USB 2.0 interface plug and play and no need extra power supply;
2.More than 20 types of automatic testing functions, similar interface with benchtop oscilloscope, easy to use;
3.Software Support: Windows NT, Windows 2000, Windows XP, Vista, Windows 7, Windows 8.
details:
|
Oscilloscope mode |
|
|
Vertical system |
|
|
Analog channel |
8 |
|
Input impedance |
Resistance: 1MΩ |
|
Input sensitivity |
10mV/div to 5V/div |
|
Input coupling |
DC |
|
resolution |
12 bit |
|
Horizontal system |
|
|
Memory depth |
4K |
|
Max. input |
400V (DC + AC peak) |
|
Real-time sampling rate |
2.4MSa/s |
|
Time base range |
1ns/div to 20000s/div (1-2-5sequences) |
|
Timebase precision |
± 50ppm |
|
Trigger system |
|
|
Time base range |
1ns/div to 20000s/div (1-2-5sequences) |
|
Timebase precision |
± 50ppm |
|
Trigger source |
CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8 |
|
Trigger mode |
edge |
|
XY mode |
|
|
X axis input |
CH1 |
|
Y axis input |
CH2 |
|
Cursor and measure |
|
|
Voltage measurement |
Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot |
|
Time measurement |
Frequency, period, rise time, fall time, positive width, negative width, duty cycle |
|
Cursor measurement |
Horizontal, vertical, track, automatic measurement modes |
|
Waveform process |
+,-, X, ÷, FFT, Invert |
|
Voltage range |
10mV to 5V/div @ x 1 probe |
|
Current range |
100mA to50.0A/div @ CC65(20A) |
|
FFT |
Rectangular, Hanning, Hamming, Blackman window |
|
Math |
Addition, subtraction, multiplication, division |
|
Programmable generator |
|
|
channel |
8 |
|
Output level |
LVTTL |
|
Frequency range |
0-250kHz |
|
interface |
USB 2.0 |
|
power |
No need extra power supply |
|
Normal |
|
|
size |
185 * 150 * 27mm / 7.3 * 5.9 * 1.06in |
|
weight |
319g / 11.28oz |
|
Package size |
23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H) |
|
weight |
915g / 32.29oz |
Package List:
1 * 1008C DAQ oscilloscope
4 * Alligator probe/cable
1 * Secondary ignition probe
4 * BNC connector
1 * USB cable
1 * CD