Hantek Oscilloscope Digital Osciloscopio 1008C

 

Hantek Oscilloscope Digital Osciloscopio 1008C

Cost effective 8 channel oscilloscope for vehicle testing; 2.4 MSa/s, 12 bit; DAQ card function; 8 channel programmable generator capable of analog signals such as crankshaft, camshaft, etc.


Vehicle test:

  • First diagnosis: intake manifold vacuum and ignition, gasoline fuel control valve vacuum and ignition, idle exhaust ignition, exhaust ignition start.
  • Ignition: primary and secondary.
  • Sensors: air flow meter, camshaft, crankshaft, distributor, lambda sensor, throttle position.
  • Bus diagnostics: bus data, can bus signal integrity, can check LH extended acquisition, can bus LIN bus.
  • Cast: Gasoline/Diesel.
  • Starter and charging circuit.


oscilloscope:

  1. 8 channel oscilloscope, 2.4MSa/s real time sampling rate.

2.12 bit vertical resolution, spectrum analysis function.


Programmable generator:

1.8 channel programmable generator.

2.Analog signals such as crankshaft and camshaft can be used.

 

Etc:

1.USB 2.0 interface plug and play and no need extra power supply;

2.More than 20 types of automatic testing functions, similar interface with benchtop oscilloscope, easy to use;

3.Software Support: Windows NT, Windows 2000, Windows XP, Vista, Windows 7, Windows 8.


details:

Oscilloscope mode

Vertical system

Analog channel

8

Input impedance

Resistance: 1MΩ

Input sensitivity

10mV/div to 5V/div

Input coupling

DC

resolution

12 bit

Horizontal system

Memory depth

4K

Max. input

400V (DC + AC peak)

Real-time sampling rate

2.4MSa/s

Time base range

1ns/div to 20000s/div (1-2-5sequences)

Timebase precision

± 50ppm

Trigger system

Time base range

1ns/div to 20000s/div (1-2-5sequences)

Timebase precision

± 50ppm

Trigger source

CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8

Trigger mode

edge

XY mode

X axis input

CH1

Y axis input

CH2

Cursor and measure

Voltage measurement

Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot

Time measurement

Frequency, period, rise time, fall time, positive width, negative width, duty cycle

Cursor measurement

Horizontal, vertical, track, automatic measurement modes

Waveform process

+,-, X, ÷, FFT, Invert

Voltage range

10mV to 5V/div @ x 1 probe
100mV to 50V/div @ x 10 probe
10V to 5000V/div @ x 1000 probe
100V to 50000V/div @ x 10000 probe
200mV to 100V/div @ 20:1

Current range

100mA to50.0A/div @ CC65(20A)
1000mA to500.0A/div @ CC65(65A)
1A to100.0A/div @ CC650(60A)
1A to200.0A/div @ CC1100(100A)
10A to2000.0A/div @ CC1100(1100A)

FFT

Rectangular, Hanning, Hamming, Blackman window

Math

Addition, subtraction, multiplication, division

Programmable generator

channel

8

Output level

LVTTL

Frequency range

0-250kHz

interface

USB 2.0

power

No need extra power supply

Normal

size

185 * 150 * 27mm / 7.3 * 5.9 * 1.06in

weight

319g / 11.28oz

Package size

23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H)

weight

915g / 32.29oz


Package List:
1 * 1008C DAQ oscilloscope
4 * Alligator probe/cable
1 * Secondary ignition probe
4 * BNC connector
1 * USB cable
1 * CD

 


Share this post

Leave a comment

Please note, comments must be approved before they are published


Language
English
Open drop down